Siemens Hipath 5000 User Manual

Step by Step
Making and Answering Calls
20
Making and Answering Calls
Special default ring signaling is set for your telephone:
• When you receive an internal call, your telephone
rings once every four seconds (single-tone se-
quence).
• When you receive an external call, your telephone
rings twice in rapid succession every four seconds
(dual-tone sequence).
• When you receive a call from the entrance tele-
phone, your telephone rings three times in rapid
succession every four seconds (triple-tone se-
quence).
• If a call is waiting, you hear a short tone (beep) every
six seconds.
The number or the name of the caller appears on the
display.
Answering a Call with the Handset
The telephone rings. The caller appears on the screen.
n Lift the handset.
Ending the call:
t Replace the handset.
or
Press the key.
Answering a Call with the Speaker
(Speakerphone Mode)
The telephone rings. The caller appears on the screen.
Press the key. The LED lights up. Use speakerphone
mode.
u or v Raise or lower the volume. Keep pressing the keys until
the desired volume is set.
Ending the call:
Press the key. The LED goes out.
Speaker
Speaker
Speaker

Siemens Hipath 5000 Specifications

General

Brand	Siemens
Model	Hipath 5000
Category	Telephone
Language	English