Siemens Hipath 5000 User Manual

Step by Step
Making and Answering Calls
28
Turning Ringer Cutoff On and Off
You can activate the ringer cutoff function if you do not
want the receive any calls. Calls are only identified by
one ring signal, an indication on the display, and a key
which has been programmed to flash (such as a trunk
key).
> : Select and confirm
1
.
or
> :
or
qml or rml Enter the code for "on" or "off".
Trace Call: Identifying Anonymous
Callers (Not for U.S.)
You can have the carrier identify malicious external call-
ers. You can save the caller’s station number during the
call or for 30 seconds after the call ends. However, it is
essential that you do not replace your handset during
this time.
Press the key. The LED lights up.
and
> : Select and confirm.
or
qlh Enter the code.
When you lift the handset, a special dial tone
(continuous buzzing tone) reminds you that do
not disturb is active.
Authorized internal callers can automatically
override the do not disturb function after five sec-
onds.
Ringer cutoff on?
[1] "Different Displays in a HiPath 4000 Environment (Not in
HiPath 500)" Æ page 118
Ringer cutoff off?
Program/Service
*
84=Trace call?
After you have finished tracing the call, the data
is stored on the carrier’s system. Now contact
your service personnel.

Siemens Hipath 5000 Specifications

General

Brand	Siemens
Model	Hipath 5000
Category	Telephone
Language	English