Step by Step
Calling Multiple Parties Simultaneously
46
Placing External Calls on Hold
If you have programmed a key on your telephone as a
hold key Æ page 69, you can place external calls on
hold.
This enables all other parties to retrieve the call on the
assigned line.
Press the US: "Hold" or UK: "Common Hold" key.
A message appears showing which line is on hold
(e.g. 801); make a note of the line number.
If a trunk key has been assigned, the LED flashes slow-
ly.
if necessary
t or Replace the handset or press the key.
Depending on your system configuration, this may be
necessary so other users can also pick up the held call.
Picking up (Retrieving) a Held Call
Precondition: One or more calls have been parked. The
telephone is idle.
Press the key. The LED lights up.
> : Select and confirm.
or
qjg Enter the code.
or
If you have programmed an "Retrieve Trk" key
Æ page 69: Press the key.
o Enter the line number you noted earlier.
or
If a "Trunk key" was assigned to this line Æ page 69:
LED flashes slowly. Press the key.
Held on line 667
Release
Program/Service
*
63=Retrieve Trk
To Next Page
Loading...
