Step by Step
Making Calls
36
Activating Tone Dialing/DTMF Suffix-
Dialing
You can transmit dual-tone multifrequency (DTMF) sig-
nals to control devices, such as, an answering machine
or automatic information system.
Press the key. The LED lights up.
> : Select and confirm
1
.
or
qig Enter the code.
o You can use the keys "0" through "9", "
*
", and "#" to trans-
mit DTMF signals.
Automatic Connection Setup (Hotline)
If this function is configured (contact your service per-
sonnel), the system automatically sets up a connection
to a preset internal or external destination.
n Lift the handset.
Depending on the setting, the connection is either set
up immediately or only after a preset period of time
(hotline after a timeout).
Program/Service
*53=DTMF dialing?
[1] "Different Displays in a HiPath 4000 Environment (Not in
HiPath 500)" Æ page 118
Ending the call also deactivates DTMF suffix-dial-
ing.
Your system may be configured so that you can
start DTMF suffix dialing immediately after set-
ting up a connection.
To Next Page
Loading...
