Siemens Hipath 5000 - Accepting a Call for Another Member of Your Team

Step by Step
Using Other Team Functions
108
or
> : Select and confirm
1
.
This turns off the audible tone for all groups and trunks.
or
r Enter the code for "Leave all groups".
or
> : Select and confirm
1
.
This turns off the audible tone for all groups and trunks.
or
q Enter the code for "Join all groups".
Accepting a Call for Another Member
of Your Team
You can accept calls for other telephones in your team
from your telephone even while engaged in another
call.
Precondition: Your telephone rings briefly. "" appears
on the upper display line with the station number or
name of the originator; the station number or name of
the caller appears on the lower line.
: Confirm.
or
Press the key. The LED lights up.
qik Enter the code.
#=Leave all groups?
[1] "Different Displays in a HiPath 4000 Environment (Not in
HiPath 500)" Æ page 118
*=Rejoin all groups?
If you deactivate the audible tone for another
group or trunk, or deactivate it for all groups and
trunks to which you belong, a special dial tone
sounds when you lift the handset.
Pickup - group?
Program/Service