Siemens Hipath 5000 - Setting Web Access Parameters

Step by Step
Graphic Interface Applications
154
Setting Web Access Parameters
If WAP server access is password-protected, you must
enter the access data here.
Click the tab.
or
f Click on the "Personal options" menu item or enter the
code.
if necessary o Enter the password (default password: 123456) and
click "OK".
or
g Click on the "Web access settings" menu item or enter
the code.
Enter user name.
o Enter password.
Click on the softkey to apply the changes.
The display changes to the "Personal options" menu.
Service
2
3
A B C
OK