Making Calls to Stored Destinations
55
Step by Step
Using Repertory Dialing Keys
Precondition: You have saved a station number on a
repertory dialing key Æ page 66.
Press the key on which the number is saved.
If the station number is located on the second level, first
press "Shift".
Using Station and System Speed-Dial
Numbers
Precondition: You have stored station speed-dial num-
bers Æ page 68 or the service personnel has stored
system speed-dial numbers.
Press the key. The LED lights up.
: Confirm
1
.
or
qk Enter the code.
o Enter a speed-dial number.
"
*
0" to "
*
9" = station speed-dialing.
"000" to "999" = system speed-dialing (contact your ser-
vice personnel).
If applicable Suffix-dialing
o If necessary, you can suffix-dial additional digits
(for example, the user’s extension) at the end of the
saved station number.
If this feature is configured, a suffix is automatically di-
aled (for example, "0" for the exchange) if no entries are
made within 4 or 5 seconds.
You can also press the repertory dial key during a
call. This automatically sets up a consultation
Æ page 40.
Program/Service
*
7=Use speed dialing?
[1] "Different Displays in a HiPath 4000 Environment (Not in
HiPath 500)" Æ page 118
To Next Page
Loading...
Need help?
General