Siemens S223 - System Memory Information; CPU Packet Limit; Average of CPU Load; Running Process

User Manual UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
A50010-Y3-C150-2-7619 101
6.3.9 System Memory Information
To display a system memory status, use the following command.
Command Mode Description
show memory Shows system memory information.
show memory {bgp | dhcp | imi |
lib | nsm | ospf | pim | rip}
Enable
Global
Shows system memory information with a specific
option.
6.3.10 CPU packet limit
To limit the packets of CPU, use the following command.
Command Mode Description
cpu packet limit <500-6000> Global
It is possible to display the packet limit of CPU using the following command.
Command Mode Description
show cpu packet limit
View
Enable
Global
6.3.11 Average of CPU Load
It is possible to display average of CPU load using the following command.
Command Mode Description
show cpuload
View
Enable
Global
Shows threshold of CPU utilization and average of
CPU utilization.
6.3.12 Running Process
The hiD 6615 S223/S323 provides a function that shows information of the running proc-
esses. The information with this command can be very useful to manage the switch.
To display information of the running processes, use the following command.
Command Mode Description
show process
Enable
Global
Shows information of the running processes.