Siemens S223 - SNMP View Record; Permission to Access SNMP View Record

User Manual UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
A50010-Y3-C150-2-7619 107
7.1.5 SNMP View Record
You can create an SNMP view record to limit access to MIB objects with object identity
(OID) by an SNMP manager.
To configure an SNMP view record, use the following command.
Command Mode Description
snmp view VIEW {included |
excluded} OID [MASK]
Creates an SNMP view record.
VIEW: view record name
included: includes sub-tree.
excluded: excludes sub-tree.
OID: OID number
MASK: Mask value (e.g. ff | ff.ff )
no snmp view VIEW [OID]
Global
Deletes a created SNMP view record.
VIEW: view record name
To display a created SNMP view record, use the following command.
Command Mode Description
show snmp view
Enable
Global
Shows a created SNMP view record.
The following is an example of creating an SNMP view record.
SWITCH(config)# snmp view TEST included 410
SWITCH(config)# show snmp view
View list
------------------------------------------------
view TEST included 410
SWITCH(config)#
7.1.6 Permission to Access SNMP View Record
To grant an SNMP group to access a specific SNMP view record, use the following com-
mand.
Command Mode Description
snmp access GROUP {v1 | v2c}
READ-VIEW WRITE-VIEW NO-
TIFY-VIEW
Grants an SNMP group to access a specific SNMP
view record.
GROUP: group name
snmp access GROUP v3 {no-
auth
| auth | priv} READ-VIEW
WRITE-VIEW NOTIFY-VIEW
Grants an SNMP version 3 group to access a specific
SNMP view record.
GROUP: group name
no snmp access GROUP
Global
Deletes a granted SNMP group to access a specific
SNMP view record.