UMN:CLI User Manual
SURPASS hiD 6615 S223/S323 R1.5
256 A50010-Y3-C150-2-7619
8.8.6 DHCP Client
An interface of the hiD 6615 S223/S323 can be configured as a DHCP client, which can
obtain an IP address from a DHCP server. The configurable DHCP client functionality al-
lows a DHCP client to use a user-specified client ID, class ID or suggested lease time
when requesting an IP address from a DHCP server. Once configured as a DHCP client,
the hiD 6615 S223/S323 cannot be configured as a DHCP server or relay agent.
8.8.6.1 Enabling DHCP Client
To configure an interface as a DHCP client, use the following command.
Command Mode Description
ip address dhcp Enables a DHCP client on an interface.
no ip address dhcp
Interface
Disables a DHCP client.
8.8.6.2 DHCP Client ID
To specify a client ID, use the following command.
Command Mode Description
ip dhcp client client-id hex HEXSTRING
ip dhcp client client-id text STRING
Specifies a client ID.
no ip dhcp client client-id
Interface
Deletes a specified client ID.
8.8.6.3 DHCP Class ID
To specify a class ID, use the following command.
Command Mode Description
ip dhcp client class-id hex HEXSTRING
ip dhcp client class-id text STRING
Specifies a class ID.
(default: system MAC address)
no ip dhcp client class-id
Interface
Deletes a specified class ID.
8.8.6.4 Host Name
To specify a host name, use the following command.
Command Mode Description
ip dhcp client host-name NAME Specifies a host name.
no ip dhcp client host-name
Interface
Deletes a specified host name.
To Next Page
Loading...
