Siemens S223 - Displaying OAM Configuration

User Manual UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
A50010-Y3-C150-2-7619 121
To display the information of peer host using OAM function, use the following command.
Command Mode Description
oam remote alarm optical <1-3>
<0-65535> PORTS
oam remote alarm temperature
<0-255> PORTS
oam remote alarm voltage {min |
max} <0-65535> PORTS
oam remote electrical mode {full
|
half} PORTS
oam remote general autonego
<1-4> {
enable | disable} PORTS
oam remote general forwarding
<3-4> {
enable | disable} PORTS
oam remote general speed <1-
4> <0-4294967295>PORTS
oam remote general user <1-4>
STRING PORTS
oam remote system interface
{
unforced | forceA | forceB}
PORTS
oam remote system interval <0-
255> PORTS
oam remote system mode
{
master | slave} PORTS
oam remote system reset
PORTS
Bridge
Shows the information of peer host using OAM func-
tion.
7.2.5 Displaying OAM Configuration
To display OAM configuration, use the following command.
Command Mode Description
show oam Shows OAM configuration.
show oam local [PORTS] Shows local OAM configuration.
show oam remote [PORTS] Shows remote OAM configuration.
show oam remote variable <0-
255> <0-255> PORTS
Shows remote OAM variable.
show oam remote variable spe-
cific
<0-255> <0-255> <0-4>
PORTS
Enable
Global
Bridge
Shows remote OAM specific variable.