Siemens S223 - Exit Current Command Mode

User Manual UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
A50010-Y3-C150-2-7619 39
3.2.5 Exit Current Command Mode
To exit to the previous command mode, use the following command.
Command Mode Description
exit Exits to the previous command mode.
end
All
Exits to Privileged EXEC enable mode.
If you use the command, exit, on Privileged EXEC View mode or Privileged EXEC En-
able mode, you will be logged out!
!