Siemens S223 - Finding Period

UMN:CLI User Manual
SURPASS hiD 6615 S223/S323 R1.5
352 A50010-Y3-C150-2-7619
• route-map
Transmits specific routing information to assigned route which has MAP-NAME.
The detail options for default route configuration are classified in 4 as above, and those
configurations can be selected more than 2 options without order.
The following is explaining options of command:
• metric <0-16777214>
• metric-type <1-2>
• always
• route-map MAP-NAME
To configure the default route with an option, use the following command.
Command Mode Description
default-information originate
metric
<0-16777214>
default-information originate
metric-type
<1-2>
default-information originate
always
default-information originate
route-map
MAP-NAME
Router Configures the default route with one option.
The following example shows how to configure default route with more than 2 options:
• default-information originate metric-type <1-2> always
• default-information originate route-map MAP-NAME metric <0-16777214>
To delete the configuration, use the following command.
Command Mode Description
no default-information originate
no default-information originate
metric
<0-16777214>
no default-information originate
metric-type
<1-2>
no default-information originate
always
no default-information originate
route-map
MAP-NAME
Router Deletes the configuration.
10.2.11 Finding Period
OSFP start to find the shortest path as soon as got a notification of changing the network
component. You can configure the period to find the path.