Siemens S223 - Authentication Port; Force Authorization; Configuring Interval for Retransmitting Request;Identity Packet

User Manual UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
A50010-Y3-C150-2-7619 67
4.5.1.4 Authentication Port
After configuring 802.1x authentication mode, you should select the authentication port.
Command Mode Description
dot1x nas-port PORTS Designates 802.1x authentication port.
no dot1x nas-port PORTS
Global
Disables 802.1x authentication port.
4.5.1.5 Force Authorization
The hiD 6615 S223/S323 can allow the users to request the access regardless of the au-
thentication from RADIUS server. For example, it is possible to configure not to be au-
thenticated from the server even though a client is authenticated from the server.
To manage the approval for the designated port, use the following command.
Command Mode Description
dot1x port-control {auto | force-
authorized
| force-unauthorized}
PORTS
Configures the way of authorization to control port
whether it has the RADIUS authentication or not.
no dot1x port-control PORTS
Global
Deletes the configuration of the way of authorization to
control port.
auto: Follows the authentication of RADIUS server.
force-authorized: Gives the authorization to a client even though RADIUS server
didn’t approve it.
force-unauthorized: Don’t give the authorization to a client even though RADIUS
server authenticates it.
4.5.1.6 Configuring Interval for Retransmitting Request/Identity Packet
In hiD 6615 S223/S323, it is possible to specify how long the device waits for a client to
send back a response/identity packet after the device has sent a request/identity packet.
If the client does not send back a response/identity packet during this time, the device re-
transmits the request/identity packet.
To configure the number of seconds that the switch waits for a response to a re-
quest/identity packet, use the following command.
Command Mode Description
dot1x timeout tx-period <1-
65535> PORTS
Sets reattempt interval for requesting request/identity
packet.
1-65535: retransmit interval (default: 30)
no dot1x timeout tx-period
PORTS
Global
Disables the interval for requesting identity.