Siemens S223 - Authentication Method; User Manual UMN:CLI; Authentication Interface; Primary Authentication Method

UMN:CLI User Manual
SURPASS hiD 6615 S223/S323 R1.5
50 A50010-Y3-C150-2-7619
4.2.1 Authentication Method
To set the system authentication method, use the following command.
Command Mode Description
login {local | remote} {radius |
tacacs | host | all} enable
Set the system authentication method.
local: authentication for console access
remote: authentication for telnet access
radius: selects RADIUS authentication.
tacacs: selects TACACS+ authentication.
host: selects nominal system authentication (default).
all: selects all the authentication methods.
login {local | remote} {radius |
tacacs | host | all} disable
Global
Disables a configured system authentication method.
4.2.2 Authentication Interface
If more than 2 interfaces are specified to the hiD 6615 S223/S323, you can designate one
specific interface to access RADIUS or TACACS server.
To designate an authentication interface, use the following command.
Command Mode Description
login {radius | tacacs} interface
INTERFACE [A.B.C.D]
Global
Designates an authentication interface.
radius: selects RADIUS authentication.
tacacs: selects TACACS+ authentication.
INTERFACE: interface name
A.B.C.D: IP address (optional)
4.2.3 Primary Authentication Method
You can set the order of the authentication method with giving the priority to each authen-
tication method. To set the primary authentication method, use the following command
Command Mode Description
login {local | remote} {radius |
tacacs | host} primary
Global
Set the primary authentication method.
local: authentication for console access
remote: authentication for telnet access
radius: selects RADIUS authentication.
tacacs: selects TACACS+ authentication.
host: selects nominal system authentication (default).