UMN:CLI User Manual
SURPASS hiD 6615 S223/S323 R1.5
62 A50010-Y3-C150-2-7619
4.4.1.5 Assigning Specific Authentication Key
After enabling ssh server, each client will upload generated key. The ssh server can as-
sign specific key among the uploaded keys from several clients.
To verify Authentication Key, use the following command.
Command Mode Description
ssh key verify FILENAME Global Verifys generated ssh key.
If the ssh server verify the key for specific client, other clients must download the key file
from ssh server to login.
4.4.2 SSH Client
The hiD 6615 S223/S323 can be used as SSH client with the following procedure.
•
Login to SSH Server
•
File Copy
•
Configuring Authentication Key
4.4.2.1 Login to SSH Server
To login to SSH server after configuring the hiD 6615 S223/S323 as SSH client, use the
following command.
Command Mode Description
ssh login DESTINATION
[PUBLIC_KEY]
Enable
Logins to SSH server.
DESTINATION: IP address of SSH server or hostname
and account
PUBLIC_KEY: Specify public key.
4.4.2.2 File Copy
To copy a file from/to SSH server, use the following command.
Command Mode Description
copy {scp l sftp} config
{download l upload} CONFIG-
FILE
Enable
Global
Downloads or uploads a file to through SSH server.
4.4.2.3 Configuring Authentication Key
SSH client can access to server through authentication key after configuring authentica-
tion key and informing it to server. It is safer to use authentication key than inputting
password every time for login, and it is also possible to connect to several SSH servers
with using one authentication key.
i
To Next Page
Loading...
