Siemens S223 - Sample Configuration

User Manual UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
A50010-Y3-C150-2-7619 71
4.5.7 Sample Configuration
The following is to show the configuration after configuring pot number 4 as the authenti-
cation port and registering IP address of authentication port and information of RADIUS
server.
SWTICH(config)# dot1x system-auth-control
SWTICH(config)# dot1x nas-port 4
SWTICH(config)# dot1x port-control force-authorized 4
SWTICH(config)# dot1x radius-server host 10.1.1.1 auth-port 4 key test
SWTICH(config)# show dot1x
802.1x authentication is enabled.
RADIUS Server : 10.1.1.1 (Auth key : test)
-------------------------------------------------------
| 1 2 3 4
802.1x |123456789012345678901234567890123456789012
-------------------------------------------------------
PortEnable |...p......................................
PortAuthed |...u......................................
MacEnable |..........................................
MacAuthed |..........................................
-------------------------------------------------------
p = port-based, m = mac-based, a = authenticated, u = unauthenticated
SWTICH(config)#
The following is configuring a term of re-authentication as 1800 and a tem of re-
authentication as 1000 sec.
SWTICH(config)# dot1x timeout quiet-period 1000 4
SWTICH(config)# dot1x timeout reauth-period 1800 4
SWTICH(config)# dot1x reauth-enable 4
SWTICH(config)# show dot1x 4
Port 4
SystemAuthControl : Enabled
ProtocolVersion : 0
PortControl : Force-Authorized
PortStatus : Unauthorized
ReauthEnabled : True
QuietPeriod : 1000
ReauthPeriod : 1800
SWTICH(config)#
The following is an example of showing the configuration after configuring the authentica-
tion based on MAC address.
SWTICH(config)# dot1x auth-mode mac-base 4
SWTICH(config)# show dot1x
802.1x authentication is enabled.
RADIUS Server : 10.1.1.1 (Auth key : test)
-------------------------------------------------------
| 1 2 3 4
802.1x |123456789012345678901234567890123456789012
-------------------------------------------------------
PortEnable |..........................................