Siemens S223 - Displaying LACP Configuration

User Manual UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
A50010-Y3-C150-2-7619 199
8.2.2.9 Displaying LACP Configuration
To display a configured LACP, use the following command.
Command Mode Description
show lacp aggregator Shows the information of aggregated port.
show lacp aggregator AGGRE-
GATIONS
Shows the information of selected aggregated port.
show lacp port Shows the information of member port.
show lacp port PORTS Shows the information of appropriated member port.
show lacp statistics
Enable
Global
Bridge
Shows aggregator statistics.
To clear LACP statistics information, use the following command.
Command Mode Description
clear lacp statistics
Enable
Global
Bridge
Clears the information of statistics.