Siemens S223 - Opaque-LSA Support; Default Route

User Manual UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
A50010-Y3-C150-2-7619 351
To release the configuration, use the following command.
Command Mode Description
no ospf restart grace-period <1-1800>
ospf restart helper never
no ospf restart helper max-grace-period <1-
1800>
Global Releases the configuration.
10.2.9 Opaque-LSA Support
Opaque-LSA is LSA Type-9, Type-10, Type-11. The hiD 6615 S323 enables Opaque-LSA
as a default but it can be released by user.
To release the enabled Opaque-LSA management, use the following command.
Command Mode Description
no capability opaque Router Releases the enabled Opaque-LSA management.
To enable Opaque-LSA management, use the following command.
Command Mode Description
capability opaque Router Enables Opaque-LSA management.
10.2.10 Default Route
You can configure ASBR (Autonomous System Boundary Router) to transmit default
route to OSPF network. Autonomous System Boundary router transmits route created ex-
ternally to OSPF network. However, it does not create system default route.
To have autonomous System Boundary router create system default route, use the follow-
ing command.
Command Mode Description
default-information originate Router Configures the default route.
The following items are detail options for the Default Route configuration.
• metric
Configures Metric value of the default route.
• metric-type
metric-type is for type of finding the path. metric-type 1 uses internal path cost with
external path cost as a cost, metric type 2 always uses external cost value only.
• always
Transmits the default route to outside.
• no-summary
Restricts to exchange routing information between OSPF area in NSSA.