Siemens S223 - Page 350

UMN:CLI User Manual
SURPASS hiD 6615 S223/S323 R1.5
350 A50010-Y3-C150-2-7619
To configure the Graceful Restart, use the following command.
Command Mode Description
capability restart {graceful |
reliable-graceful | signaling}
Configures the Graceful Restart.
no capability restart
Router
Releases the configuration.
The following items are additional options for the Graceful Restart:
• grace-period
When OSPF restarts, process is keeping status in graceful for the time configured as
grace-period. After the configured time, OSPF operates in normal.
• helper
This is functions that helps other routers around the restarting router. It makes re
starting router as a working and transmitting to other routers. only-reload is for the
case of OSPF router is restarting, only-upgrade is for the OSPF router which is up-
grading software, and max-grace-period works when grace-period from other
routers has less value than it. Configuration for Helper can be selected more than 2
options without order.
To configure the additional options for Graceful Restart, use the following command.
Command Mode Description
ospf restart grace-period <1-1800>
ospf restart helper max-grace-period <1-1800>
ospf restart helper max-grace-period <1-1800>
only-reload [only-upgrade]
ospf restart helper max-grace-period <1-1800>
only-upgrade [only-reload]
ospf restart helper only-reload [only-upgrade]
ospf restart helper only-reload only-upgrade
max-grace-period
<1-1800>
ospf restart helper only-reload max-grace-
period
<1-1800> [only-upgrade]
ospf restart helper only-upgrade [only-reload]
ospf restart helper only-upgrade only-reload
max-grace-period
<1-1800>
ospf restart helper only-upgrade max-grace-
period
<1-1800> [only-reload]
Global
Configures the additional options for
Graceful Restart.