Siemens S223 - 6 System Environment; Environment Configuration; Host Name; Time and Date

User Manual UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
A50010-Y3-C150-2-7619 83
6 System Environment
6.1 Environment Configuration
You can configure a system environment of the hiD 6615 S223/S323 with the following
items:
•
Host Name
•
Time and Date
•
Time Zone
•
Network Time Protocol
•
Simple Network Time Protocol (SNTP)
•
Terminal Configuration
•
Login Banner
•
DNS Server
•
Fan Operation
•
Disabling Daemon Operation
•
System Threshold
6.1.1 Host Name
Host name displayed on prompt is necessary to distinguish each device connected to
network.
To set a new host name, use the following command.
Command Mode Description
hostname NAME Creates a host name of the switch, enter the name.
no hostname [NAME]
Global
Deletes a configured host name, enter the name.
To see a new host name, use the following command.
Command Mode Description
show running-config hostname Global Shows the host name.
The following is an example of changing hostname to “hiD6615”
SWITCH(config)# hostname hiD6615
hiD6615(config)#
6.1.2 Time and Date
To set system time and date, use the following command.
Command Mode Description
clock DATETIME Sets system time and date.
show clock
Enable
Global
Shows system time and date.