Siemens S223 - Link Aggregation

UMN:CLI User Manual
SURPASS hiD 6615 S223/S323 R1.5
192 A50010-Y3-C150-2-7619
default br2 br3
br4
Outer Network
Uplink Port
SWITCH(bridge)# vlan create br2
SWITCH(bridge)# vlan create br3
SWITCH(bridge)# vlan create br4
SWITCH(bridge)# vlan del default 3-8
SWITCH(bridge)# vlan add br2 3,4 untagged
SWITCH(bridge)# vlan add br3 5,6 untagged
SWITCH(bridge)# vlan add br4 7,8 untagged
SWITCH(bridge)# vlan add br2 24 untagged
SWITCH(bridge)# vlan add br3 24 untagged
SWITCH(bridge)# vlan add br4 24 untagged
SWITCH(bridge)# vlan create br5
SWITCH(bridge)# vlan add br5 1-42 untagged
SWITCH(bridge)# vlan fid 1-5 5
SWITCH(bridge)# show vlan
u: untagged port, t: tagged port
-----------------------------------------------------------------
| 1 2 3 4
Name( VID| FID) |123456789012345678901234567890123456789012
-----------------------------------------------------------------
default( 1| 5) |uu......uuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuu
br2( 2| 5) |..uu...................u..................
br3( 3| 5) |....uu.................u..................
br4( 4| 5) |......uu...............u..................
br5( 5| 5) |uuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuu
SWITCH(bridge)#
8.2 Link Aggregation
Link Aggregation Control Protocol (LACP) complying with IEEE 802.3ad bundles several
physical ports together to one logical port so that user can get enlarged bandwidth.