Siemens S223 - 3 Command Line Interface (CLI); Command Mode

User Manual UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
A50010-Y3-C150-2-7619 27
3 Command Line Interface (CLI)
This chapter describes how to use the Command Line Interface (CLI) which is used to
configure the hiD 6615 S223/S323 system.
•
Command Mode
•
Useful Tips
3.1 Command Mode
You can configure and manage the hiD 6615 S223/S323 by console terminal that is in-
stalled on user’s PC. For this, use the CLI-based interface commands. Connect RJ45-to-
DB9 console cable to the hiD 6615 S223/S323.
This chapter explains how CLI command mode is organized before installing. CLI
command mode is consisted as follow:
•
Privileged EXEC View Mode
•
Privileged EXEC Enable Mode
•
Global Configuration Mode
•
Bridge Configuration Mode
•
Rule Configuration Mode
•
DHCP Configuration Mode
•
DHCP Option 82 Configuration Mode
•
Interface Configuration Mode
•
RMON Configuration Mode
•
Router Configuration Mode
•
VRRP Configuration Mode
•
Route-Map Configuration Mode