Siemens S223 - Page 345

User Manual UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
A50010-Y3-C150-2-7619 345
To configure NSSA with one option, use the following command.
Command Mode Description
area <0-4294967295> nssa default-information-
originate
area <0-4294967295> nssa default-information-
originate metric
<0-16777214>
area <0-4294967295> nssa default-information-
originate metric-type
<1-2>
area <0-4294967295> nssa no-redistribution
area <0-4294967295> nssa no-summary
Router Configures NSSA with one option.
Command Mode Description
area <0-4294967295> nssa translator-role
{
candidate | never | always}
Router Configures NSSA with one option.
The following example shows how to configure NAAS with more than 2 options:
• area <0-4294967295> nssa no-summary no-redistribution
• area <0-4294967295> nssa translator-role {candidate | never | always} default-
information-originate metric-type <1-2> no-redistribution
To delete configured NSSA, use the following command.
Command Mode Description
no area <0-4294967295> nssa
no area <0-4294967295> nssa default-
information-originate
no area <0-4294967295> nssa default-
information-originate metric
<0-16777214>
no area <0-4294967295> nssa default-
information-originate metric-type
<1-2>
no area <0-4294967295> nssa no-
redistribution
no area <0-4294967295> nssa no-summary
no area <0-4294967295> nssa translator-role
{
candidate | never | always}
Router Deletes configured NSSA.