Siemens S223 - Page 45

User Manual UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
A50010-Y3-C150-2-7619 45
To delete a configured security level, use the following command.
Command Mode Description
no privilege Deletes all configured security levels.
no privilege bgp level <0-15>
{COMMAND | all}
no privilege bridge level <0-15>
{COMMAND | all}
no privilege configure level
<0-15> {COMMAND | all}
no privilege dhcp-option82 level
<0-15> {COMMAND | all}
no privilege dhcp-pool level
<0-15> {COMMAND | all}
no privilege dhcp-class level
<0-15> {COMMAND | all}
no privilege dhcp-pool-class
level <0-15> {COMMAND | all}
no privilege enable level <0-15>
{COMMAND | all}
no privilege interface level
<0-15> {COMMAND | all}
no privilege ospf level <0-15>
{COMMAND | all}
no privilege pim level <0-15>
{COMMAND | all}
no privilege rip level <0-15>
{COMMAND | all}
no privilege rmon-alarm level
<0-15> {COMMAND | all}
no privilege rmon-event level
<0-15> {COMMAND | all}
no privilege rmon-history level
<0-15> {COMMAND | all}
no privilege route-map level
<0-15> {COMMAND | all}
no privilege rule level <0-15>
{COMMAND | all}
no privilege view level <0-15>
{COMMAND | all}
no privilege vrrp level <0-15>
{COMMAND | all}
Global
Delete a configured security level on each mode.