Associated stations
The WBM page shows the clients logged on to the access point as well as additional
information, for example status, signal strength, MAC address.
Description
● Associated stations
Shows the number of clients logged on to the access point.
The table has the following columns:
● AID (Associated ID)
Shows the connection ID of the client. If the client connects to the access point via the VAP
interface, the client is assigned a connection ID. The connection ID is unique within a VAP
interface. If two clients log on at different VAP interfaces, both clients can receive the same
ID.
● Radio
Shows the available WLAN interfaces.
● Port
Shows the VAP interface.
● Type
Shows the client type, for example "Sta" stands for IEEE 802.11 standard client.
● MAC Address
Shows the MAC address of the client.
● System Name
Shows the system name of the client if the client communicates this to the access point. Not
all clients support this parameter.
● Channel
Shows the channel over which the client communicates with the access point.
● Signal Strength [dBm]
Shows the signal strength of the connected client in decibel milliwatts.
● Signal strength [%]
Shows the signal strength of the connected client as a percentage.
● Age [s]
Shows the time that has elapsed since the last client activity.
● Security
Shows which authentication method is used.
If the authentication method "Open System + Encryption" or "Shared Key" is used,
"Encrypted (WEP/AES)" is displayed for both authentication methods.
Configuring with Web Based Management
6.4 "Information" menu
SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C485-03 123
To Next Page
Loading...
Need help?
General
