If domain names are stored, you have the option of entering the host name for some of the IP
address fields.
Description
The page contains the following boxes:
● Primary Domain
Enter the name of the primary domain. This entry is used first to resolve a host name.
● Domain Name
Enter the name of the other domain.
The table contains the following columns:
● Select
Select the check box in the row to be deleted.
● Domain Name
Shows the name of the other domain.
● Origin
Shows whether the domain name was configured manually or was assigned by DHCP.
Procedure
Specify primary domain
1. In the "Primary Domain" field, enter the name of the primary domain.
2. Click the "Set Values" button.
Specify additional domain
1. In the "Domain Name" field, enter the name of the other domain.
2. Click the "Create" button.
Configuring with Web Based Management
6.5 "System" menu
SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management
148 Configuration Manual, 11/2019, C79000-G8976-C485-03
To Next Page
Loading...
Need help?
General
