Information about the license of the PLUG
A PLUG configuration can only store the configuration of a device. In addition to the
configuration, a PLUG license also contains a license that enables certain functions.
Description of the displayed boxes
● State
Shows the status of the PLUG license. The following are possible:
– ACCEPTED
The PLUG in the device contains a suitable and valid license.
– NOT ACCEPTED
The license of the inserted PLUG is not valid
– NOT PRESENT
No PLUG is inserted in the device.
– MISSING
There is no PLUG inserted. Functions are configured on the device for which a license
is required.
– WRONG
The inserted PLUG is not suitable for the device.
– UNKNOWN
Unknown content of the PLUG license.
– DEFECTIVE
The content of the PLUG license contains errors.
● Article number
● Shows the article number of the PLUG. The PLUG is available for various functional
enhancements and for various target systems.
Configuring with Web Based Management
6.5 "System" menu
SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management
214 Configuration Manual, 11/2019, C79000-G8976-C485-03
To Next Page
Loading...
