● IP Address
Shows the IPv4 address of the subnet.
● Subnet Mask
Shows the subnet mask.
● Address Type
Displays the address type. The following values are possible:
– Primary
The first IPv4 address that was configured on an IPv4 interface.
– Secondary
All other IPv4 addresses that were configured on an IPv4 interface.
● IP Assign Method
Shows how the IPv4 address is assigned. The following values are possible:
– Static
The IPv4 address is static. You enter the settings in "IP Address" and "Subnet Mask".
– Dynamic (DHCP)
The device obtains a dynamic IPv4 address from a DHCPv4 server.
Configuring with Web Based Management
6.8 Menu "Layer 3 (IPv4)"
SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management
284 Configuration Manual, 11/2019, C79000-G8976-C485-03
To Next Page
Loading...
Need help?
General
