Description
The page contains the following:
● User Account
Enter the name for the user. The name must meet the following conditions:
– It must be unique.
– It must be between 1 and 250 characters long.
– The following characters must not be included: § ? " ; :
The characters for Space and Delete must also not be included.
Note
User name cannot be changed
After creating a user, the user name can no longer be modified.
If a user name needs to be changed, the user must be deleted and a new user created.
● Password Policy
Shows which password policy is being used.
– High
Password length: at least 8 characters, maximum 128 characters
At least 1 uppercase letter
At least 1 special character
At least 1 number
– Low
Password length: at least 6 characters, maximum 128 characters
You configure the password policy on the page "Security > Passwords > Options".
● Password
Enter the password. The strength of the password depends on the set password policy.
● Password Confirmation
Enter the password again to confirm it.
● Role
Select a role.
You can choose between system-defined and self-defined roles, refer to the page "Security
> Users > Roles.".
The table contains the following columns:
● Select
Select the check box in the row to be deleted.
Note
The preset users as well as logged in users cannot be deleted or changed.
● User Account
Shows the user name.
Configuring with Web Based Management
6.10 "Security" menu
SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C485-03 295
To Next Page
Loading...
Need help?
General
