Description
The page contains the following:
● Role Name
Enter the name for the role. The name must meet the following conditions:
– It must be unique.
– It must be between 1 and 64 characters long.
Note
Role name cannot be changed
After creating a role, the name of the role can no longer be changed.
If a name of a role needs to be changed, the role must be deleted and a new role created.
The table contains the following columns:
● Select
Select the check box in the row to be deleted.
Note
Predefined roles and assigned roles cannot be deleted or modified.
● Role
Shows the name of the role.
● Function Right
Select the function rights of the role.
– 1
Users with this role can read device parameters but cannot change them. Users with this
role can change their own password.
– 15
Users with this role can both read and change device parameters.
Note
Function right cannot be changed
If you have assigned a role, you can no longer change the function right of the role.
If you want to change the function right of a role, follow the steps outlined below:
1. Delete all assigned users.
2. Change the function right of the role:
3. Assign the role again.
● Description
Enter a description for the role. With predefined roles a description is displayed. The
description text can be up to 100 characters long.
Configuring with Web Based Management
6.10 "Security" menu
SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C485-03 297
To Next Page
Loading...
