Description
The page contains the following:
● Group Name
Enter the name of the group. The name must match the group on the RADIUS server.
The name must meet the following conditions:
– It must be unique.
– It must be between 1 and 64 characters long.
– The following are not permitted: § ? " ; :
The table contains the following columns:
● Select
Select the check box in the row to be deleted.
● Group
Shows the name of the group.
● Role
Select a role. Users who are authenticated with the linked group on the RADIUS server
receive the rights of this role locally on the device.
You can choose between system-defined and self-defined roles, refer to the page "Security
> Users > Roles.".
● Description
Enter a description for the link of the group.to a role. The description text can be up to 100
characters long.
Procedure
Linking a group to a role.
1. Enter the name of a group.
2. Click the "Create" button.
3. Select a role.
4. Enter a description for the link of a group.to a role.
5. Click the "Set Values" button.
Deleting the link between a group and a role
1. Select the check box in the row to be deleted.
2. Click the "Delete" button. The entries are deleted and the page is updated.
Configuring with Web Based Management
6.10 "Security" menu
SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C485-03 299
To Next Page
Loading...
Need help?
General
