Description
The page contains the following boxes:
● Port
Select the required port from the drop-down list.
● IP Address
Enter the IP address of the devices accessible to the client.
The table has the following columns:
● Select
Select the check box in the row to be deleted
● Radio
Specifies the WLAN interface to which the settings relate
● Port
Specifies the VAP interface to which the settings relate
● IP Address
The IP Address of the devices accessible to the client. If necessary, you can change the IP
address.
● Resolver IP Address
The IP address that the access point uses to resolve the allowed IP address. The entry is
necessary when the management IP address of the access point is located in a different
subnet.
If the IP address "0.0.0.0" is configured for "Resolver IP Address", the management IP
address is used for resolution.
Procedure
Creating an entry
1. Select a port from the "Port" drop-down list.
2. In the "IP Address" box, enter the IP address accessible for the client.
3. Click the "Create" button. A new entry is created in the table.
Deleting an entry
1. Enable "Select" in the row to be deleted.
2. Click the "Delete" button. The entry is deleted.
Configuring with Web Based Management
6.10 "Security" menu
SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management
328 Configuration Manual, 11/2019, C79000-G8976-C485-03
To Next Page
Loading...
Need help?
General
