Management of the identifiers
Log text {protocol}: User {user name} created group {group} and assigned to role {role}.
Standard IEC 62443-3-3 Reference: SR1.4
Description The administrator has created a group and assigned it to a role.
Example WBM: User admin created group it-service and assigned to role service.
Severity Info
Facility local0
Log text User {user name} deleted group {group} and the role {role} assignment.
Standard IEC 62443-3-3 Reference: SR1.4
Description The administrator has deleted an existing group and the role assignment.
Example WBM: User admin deleted group it-service and the role service assignment.
Severity Info
Facility local0
Failed login attempts
Log text User {user name} account is locked for {time} minutes after {failed login count}
unsuccessful login attempts.
Standard IEC 62443-3-3 Reference: SR1.11
Description If there are too many failed logins, the corresponding user account was locked for
a specific period of time.
Example User admin account is locked for 10 minutes after 30 unsuccessful login attempts.
Severity Warning
Facility local0
Usage control of wireless connections (connection over WLAN)
Log text {vap}: Client {client mac} associated successfully.
Standard IEC 62443-3-3 Reference: SR 2.2
Description WLAN client connected to AP.
Example VAP1.1: Client 18:65:90:ab:78:f4 associated successfully.
Severity Info
Facility local0
Log text Overlap-AP found on {wlan interface}: AP {ssid} {ap mac} found on channel {chan-
nel} rssi {signal strength}.
Standard IEC 62443-3-3 Reference: SR 2.2
Description Radio frequency is already in use.
Example Overlap-AP found on WLAN 1: AP scalance 20:a8:b9:80:44:80 found on channel
11
rssi 12.
Appendix E
E.3 Syslog messages
SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C485-03 359