• Use washers to maintain the centering in the shaft extension for removal.
• If necessary, fully balance the motor with output elements according to ISO 1940.
Figure 6-2 Fitting and removing output elements; A = intermediate washer (for maintaining the
centering in the shaft extension)
Procedure
WARNING
Risk of injury and damage to property as a result of incorrect installation
Improper and incorrect installation can lead to serious injuries.
Observe the instructions for safe installation.
Geared motors
6.2 Installation
ATD4xxW for industrial applications
System Manual, 06/2022, A5E51901827B AA 205
To Next Page
Loading...
