Siemens SIDOOR ATD4 W Series - Dimension Drawing of Deflector Pulley with Tensioning Device and Mounting Bracket

6.4.21 Dimension drawing of de󹪞ector pulley with tensioning device and mounting
bracket
Overhead pulley device
2x Hexagonal screws M6x12 DIN 933
2x Washers 6,4 DIN 125
Tension bar
Tension screw
M6x30 DIN 933
3x Hexagonal safety srew
M6x16
Mounting bracket
Tensioning device
2x Hexagonal screws M6x12 DIN 933
2x Washers 6,4 DIN 125
Mounting bracket
Tensioning device
Tension bar
Tension screw
M6x30 DIN 933
Overhead pulley device
Tension width
20 mm
Average timing chain distance 106,5
Figure 6-14 De󹪞ector pulley with tensioning device and mounting bracket
Geared motors
6.4 Technical speci󹪝cations
ATD4xxW for industrial applications
232 System Manual, 06/2022, A5E51901827B AA