Siemens SIDOOR ATD4 W Series - Standards, Directives and Laws; Safety; Emc

Parameter Unit Set value
FBLOCK con󹪝guration –
Output transmission mm/rev
Force limit for learn run N
Default command input –
Hold-open time standard s
Hold-open time cord-operated switch s
Duration close command in CLOSE –
Speed critical Range OPEN mm/s
Force-speci󹪝c range OPEN N
Speed critical Range CLOSE mm/s
Force-speci󹪝c range CLOSE N
Basic parameters (as of V1.09)
Output transmission mm/rev
Motor direction
Pulse encoder direction
Door width mm
Dynamic mass kg
Frictional force open N
Frictional force close N
Average friction current open mA
Average friction current close mA
A.4 Standards, directives and laws
A.4.1 Safety
EN ISO 13849-1:2015
The safety standard EN ISO 13849 deals with the general design principles for the safety-related
parts of control systems. Part 1 de󹪝nes general design principles.
A.4.2 EMC
Immunity
EN 61000-6-2:2005
Generic standards – Immunity for industrial environments
Appendices
A.4 Standards, directives and laws
ATD4xxW for industrial applications
System Manual, 06/2022, A5E51901827B AA 341