Siemens SIDOOR ATD4 W Series - Configuration Record

A.3 Con󹪝guration record
Commissioning engi‐
neer
Date
Controller
Industrial applications
☐ SIDOOR ATD401W
☐ SIDOOR ATD420W
☐ SIDOOR ATD430W
FW version: _____________
Motor
☐ SIDOOR M3 L/R
☐ SIDOOR MDG3 L/R
☐ SIDOOR M4 L/R
☐ SIDOOR MDG4 L/R
☐ SIDOOR M5 L/R
☐ SIDOOR MDG5 L/R
Power supply
☐ SIDOOR NT40
☐ SIDOOR TRANSFORMER
☐ SIDOOR TRANSFORMER UL
☐ SITOP PSU8200
☐ Building DC voltage supply
Software / additional devices
☐ SIDOOR SOFTWARE KIT
☐ SIDOOR SERVICE TOOL
☐ SIDOOR LINK
Note
Parameter changes
Parameters should always be adjusted during normal operation with the door in the CLOSED
position, because the controller then accepts the values immediately.
Appendices
A.3 Con󹪝guration record
ATD4xxW for industrial applications
System Manual, 06/2022, A5E51901827B AA 339