Procedure
Proceed as follows to install the transformer:
Steps Figure
1. Drill the hole for the screw ① as shown
in the dimension drawing.
2. Secure the transformer with 1 screw
(M6, minimum length 70 mm) ① on
a at metal surface.
7.2.3 Connecting terminals
Slots
The slots for the SIDOOR TRANSFORMER are as follows:
Controller Slot
SIDOOR ATD4xxW
Power supply
7.2 SIDOOR TRANSFORMER
ATD4xxW for industrial applications
System Manual, 06/2022, A5E51901827B AA 245
To Next Page
Loading...
