Siemens SIDOOR ATD4 W Series - Communications; Application-Specific Standards

Emission standard for residential environments
EN 61000-6-3: 2007+A1:2011
Generic standards – Interference emission for residential, business and commercial areas as well
as small businesses
Note
The speci󹪝cations of DIN EN 61000-6-3 are met when the SIDOOR TRANSFORMER or SIDOOR
TRANSFORMER UL is used as a power supply component. EN 61000-6-3 is not ful󹪝lled if the
SIDOOR NT40 is used as the power supply component.
Emission standard for industrial environments
EN 61000-6-4:2007 +A1:2011
Generic standards – Interference emission for industrial environments
A.4.3 Communications
The EIA 485 standard applies to physical data transfer (RS 485 interface).
USS protocol speci󹪝cation, Edition 09.94 by Walter Möller-Nehring, Siemens AG, ASI 1 D SP,
Erlangen and Wolfgang Bohrer, Siemens AG, ASI 1 D SP, Erlangen
PROFIBUS was de󹪝ned in DIN 19245 in 1991/1993, changed to EN 50170 in 1996 and has been
de󹪝ned in IEC 61158/IEC 61784 since 1999.
PROFINET DIN EN 61158 and IEC 61784-2
A.4.4 Application-speci󹪝c standards
WARNING
Compliance with these standards requires appropriate hardware, parameter
assignment, setup and veri󹪝cation.
power-operated guards
EN ISO 14120:2015 Safety of machinery – Isolating protective devices –
General requirements for the design and construction of 󹪝xed and movable guards, Type B
Standard
For EN ISO 14120:2015, particular attention must be paid to section 5.2.5.4:
Appendices
A.4 Standards, directives and laws
ATD4xxW for industrial applications
342 System Manual, 06/2022, A5E51901827B AA