Siemens SIDOOR ATD4 W Series - Training; Spare Parts Services; Faq; Important Product Information

1.4.7 Training
Description
SITRAIN – Digital Industry Academy o󹪜ers a comprehensive range of training courses on
Siemens industrial products – directly from the manufacturer, for all industries and use cases, for
all knowledge levels from beginner to expert.
More information can be found on the Internet via the following address (
https://
www.siemens.com/sitrain).
1.4.8 Spare parts services
Description
Information on the online spare parts service "Spares on Web" is provided in the Internet at the
following address (
https://www.sow.siemens.com).
1.4.9 FAQ
FAQ
If the hazard analysis of a system with SIDOOR door control unit shows that the door operator
must be protected with an emergency stop, you can 󹪝nd additional information (
https://
support.industry.siemens.com/cs/ww/en/view/109743868) here.
Applications & Tools
Applications & Tools support you with various tools and examples for solving your automation
tasks. Solutions are shown in interplay with multiple components in the system - separated from
the focus on individual products.
You can 󹪝nd Applications & Tools on the Internet (https://support.industry.siemens.com/cs/ww/
en/ps/18286/ae)
1.5 Important product information
1.5.1 Intended use
SIDOOR controllers may only be used in the system con󹪝gurations and speci󹪝cations provided
by Siemens.
Introduction
1.5 Important product information
ATD4xxW for industrial applications
System Manual, 06/2022, A5E51901827B AA 19