Siemens SIDOOR ATD4 W Series - Parameter Index (IND)

Response ID Description
Dec. Bit
15
Bit
14
Bit
13
Bit
12
13 1 1 0 1 Reserved
14 1 1 1 0 Reserved
15 1 1 1 1 Reserved
1)
The element number used is transferred in the IND array subindex.
2)
The position in the array is stated in the IND array subindex.
If orders cannot be executed, the order receiver sends the response ID "Order not executable",
and transfers the corresponding error ID in the parameter value (PWE).
Table A-4 Error IDs for the response ID "Order not executable"
Error ID Description
0 Impermissible parameter ID
1 Parameter value cannot be changed.
2 Parameter limits not observed
3 Subindex outside the array
4 Parameter is not an array
5 Parameter type is invalid (mismatch word and double word)
102 Communication channel too small for the required response
104 Invalid value, parameter allows only certain values
106 Request not observed or task not supported
A.1.1.2 Parameter index (IND)
Overview
3DUDPHWHUFKDQQHO
VWZRUGQG
ZRUG
UGDQGWKZRUG

6HLWHQLQGH[[6XELQGH[,1'
3.(,1'3:(
Appendices
A.1 Structure of user data/process data
ATD4xxW for industrial applications
System Manual, 06/2022, A5E51901827B AA 313