Siemens SIDOOR ATD4 W Series - Page 44

Accessories Article No. Description
SIDOOR toothed belt 6FB1104-0AT01-0AB0
• Single-toothed STS
• Super Torque toothed belt
• Length 4 m, width 12 mm.
6FB1104-0AT02-0AB0
• Single-toothed STS
• Super Torque toothed belt
• Length 45 m, width 12 mm.
6FB1104-0AT03-0AB0
• Single-toothed STS
• Super Torque toothed belt
• Length 4 m, width 14 mm.
6FB1104-0AT04-0AB0
• Single-toothed STS
• Super Torque toothed belt
• Length 55 m, width 14 mm.
SIDOOR MDG-CABLE 5 m 6FB1104-0AT05-0CB2
• Cable for connecting the SIDOOR MDG3, MDG4 and
MDG5 geared motors and the SIDOOR ATD4xxW con‐
trollers
• Cable length 5 m
SIDOOR MDG-CABLE 10 m 6FB1104-0AT10-0CB2
• Cable for connecting the SIDOOR MDG3, MDG4 and
MDG5 geared motors and the SIDOOR ATD4xxW con‐
trollers
• Cable length 10 m
SIDOOR MDG-CABLE 15 m 6FB1104-0AT15-0CB2
• Cable for connecting the SIDOOR MDG3, MDG4 and
MDG5 geared motors and the SIDOOR ATD4xxW con‐
trollers
• Cable length 15 m
SIDOOR MDG CABLE 20 m 6FB1104-0AT20-0CB2
• Cable for connecting the SIDOOR MDG3, MDG4 and
MDG5 geared motors and the SIDOOR ATD4xxW con‐
trollers
• Cable length 20 m
PROFIBUS FC bus connector
RS 485
6GK1500-0FC10 Bus connector with axial cable outlet (180°, 20 m cable) for
connecting the ATD420W controller to the PROFIBUS bus
cable
PROFIBUS FC Standard Cable GP 6XV1830-0EH10 PROFIBUS cable for connecting the SIDOOR ATD420W con‐
troller to the higher-level SIMATIC controller
IE FC RJ45 plug 180 4X2 6GK1901-1BB11-2AB0 Plug connector with axial cable outlet (180°) for connecting
the SIDOOR ATD430W controller to the PROFINET bus cable
IE FC TP Standard Cable GP 6XV1878-2A Cable for connecting the SIDOOR ATD430W controller to the
higher-level SIMATIC controller
DIN rail holder 6FB1144-0AT00-3AS0 DIN rail holder with 󹪝xing screws for SIDOOR ATD4xxW con‐
trollers
You will 󹪝nd more accessories in the Industry Mall (https://mall.industry.siemens.com/)
System overview
3.2 Products
ATD4xxW for industrial applications
42 System Manual, 06/2022, A5E51901827B AA