Siemens SINAMICS G110M - Go Online and Start Wizard for Basic Commissioning

Commissioning
5.2 Basic commissioning
SINAMICS G110M Operating Instructions
Operating Instructions, 04/2015, FW V4.7.3, A5E31298649B AD
109
You have created your STARTER project.
5.2.7.3
Go online and start wizard for basic commissioning
Procedure
Proceed as follows to start the basic commissioning online with the converter:
1.
Select your project and go online: .
2.
Select the device or the devices with which you wish
to go online.
3.
Download the hardware configuration found online in
your project (PG or PC). STARTER shows you
which converter it is accessing online and which
offline:
② The converter is online
③ The converter is offline
4.
When you are online, double-click on "Control Unit".
5.
Start the wizard for basic commissioning.
You are online and have started basic commissioning.