Siemens SINAMICS G110M - The Device Trace in STARTER

Appendix
A.5 Working with STARTER
SINAMICS G110M Operating Instructions
318 Operating Instructions, 04/2015, FW V4.7.3, A5E31298649B AD
A.5.2
The device trace in STARTER
Description
The device trace graphically displays inverter signals with respect to time.
Signals
In two settings that are independent of one another, using you can interconnect eight
signals each.
Recording
You can start a measurement as frequently as you require. As long as you do not exit
START, the results remain under the "Measurements" tab with data and time. When
terminating STARTER or under the "Measurements" tab, you can save the measurement
results in the *.trc format.