Fundamental safety instructions
1.5 Residual risks of power drive systems
SINAMICS G110M Operating Instructions
20 Operating Instructions, 04/2015, FW V4.7.3, A5E31298649B AD
Note
The components must be protected against conductive contamination (e.g. by installing them
in a control cabinet with degree of protection IP54 according to IEC 60529 or NEMA 12).
Assuming that conductive contamination at the installation site can definitel
y be excluded, a
lower degree of cabinet protection may be permitted.
For more information about residual risks of the components in a drive system, see the
relevant sections in the technical user documentation.
To Next Page
Loading...
