Alarms, faults and system messages
11.1 Alarms
SINAMICS G110M Operating Instructions
288 Operating Instructions, 04/2015, FW V4.7.3, A5E31298649B AD
Figure 11-2 Saving the second alarm in the alarm buffer
The alarm buffer can contain up to eight alarms. If an additional alarm is received after the
eighth alarm - and none of the last eight alarms have been removed - then the next to last
alarm is overwritten.
Figure 11-3 Complete alarm buffer
Emptying the alarm buffer: Alarm history
The alarm history traces up to 56 alarms.
To Next Page
Loading...
