Siemens SINAMICS G110M - 5 Commissioning

Commissioning
5.2 Basic commissioning
SINAMICS G110M Operating Instructions
Operating Instructions, 04/2015, FW V4.7.3, A5E31298649B AD
99
5.
Select "Yes (Enter Motor Data)
" to manually enter the
motor data from the rating label of the motor.
OR
6.
Select "No (Enter Motor Code)
" to enter the motor code
from the motor rating label.
All the relevant motor data will be automatically entered.
7.
The IOP will then present a number of screens, spec
ific to your selection of Step 5 or
Step 6. Enter the relevant data in the appropriate fields as they are presented. You will
automatically advanced through the commissioning process. Once the motor data has
been entered, the steps shown below will be presented.
8.
Select the Technology Application characteristics of the
application.
11.
Select the required macro source.
See
p0015 Macros (Page 100).