Siemens SITRANS FUG1010 IP65 NEMA 4X - Page 257

1010GCNFM-3C
Index
Index-3
Data Bits 4-89
Setting The Data Word Length 4-89
Data Scatter 6-2
Data Span/Set/Cal 6-9
Data Span/Set/Cal Menu 4-39
Data Stability 6-2
Data Drift 6-2
Data Scatter 6-2
Deadband Control 4-34
Defragment Command 4-5
Defragmenting Memory 4-84
Density (SG) 1-3
Detection Modes 4-70
Diagnostic
Data 6-10
Data Menu 4-61
Main Diagnostic Menu Description 4-62
Main Screen 4-62
Diagnostic Graph Screen 4-71
Command Modes
Digital Damping Control (Hot Key 1 and 2) 4-72
Envelope Threshold Adjustment (Hot Key 5) 4-73
Signal Masking Function (Hot Key 6) 4-73
Transit-Time Adjustment (Hot Key 3) 4-72
Zero Crossover Adjustment (Hot Key 4) 4-72
Correlated Plot Menu 4-71
Hot Key Summary 4-74
Text Display 4-71
Time Base Control 4-71
Direct Mode-Mounting Frames, Spacer Bar and Spacing Guide 5-6
Aligning The Transducers 5-9
Finding The Halfway Distance 5-9
Display Datalogger 4-54, 4-81
Enable, No-line Wrap Mode, Scroll 4-55
Dual PathMenu Chart 6-8
Dual Path Flow 3-7
E
Editing The Default SmartSlew 4-33
Editing The Viscosity (cP) Setting 4-13
Entering Alphanumeric Strings 3-6
Entering Numeric Data 3-4
Estimating Log Time Left 4-54, 4-83
F
Factory-installed
Flowmeter and Spools 2-1
Fault Messages 4-75
Fixed MW g/mole 4-14
Fixed Pressure PSIA 4-14
Fixed Temperature 4-14
Flow Conditions 6-2
Low Flow Rates 6-2
Flow Data Scatter, Data Damping 6-3