ENT (Enter) Key
Use the <ENT> key to store a current numeric value or option list item.
Flowmeter
Refers to the flowmeter itself (the transmitter and sensors combined).
Graphic Screen
Refers to the integral display screen.
Initial Makeup
An internal process performed during installation, where the flowmeter acquires its receive
signal and enhances other parameters for optimal operation at a site.
In-process Makeup
An internal process where the flowmeter recovers its Initial Makeup parameters after a fault
condition interrupts operation.
Installation Menu
The flowmeter’s overall
menu structure. It allows you to define all aspects of operation for the
flowmeter.
Interface m/s
Refers to an alarm function that declares the passage of a liquid or gas interface by a
comparison of the relative sonic velocities of the two liquids or two gases.
LAPTOT
Refers to a system function that freezes the Totalizer display, while the Totalizer continues to
update its registers.
Local Display
Refers to the flowmeter integral display screen.
Menu
Sub-sections of the Installation Menu that allow you to define specific operational functions
(e.g., RS-232 Setup).
Glossary
FUP1010 IP67 Portable Flowmeter
152
Operating Instructions, 02/2010, A5E02951522A Revision 01
To Next Page
Loading...
Need help?
General
